Product Image

DOWNLOAD AN INSTANT CUSTOM QUOTE FOR ANY HAAS MACHINE

GET QUOTE

Productivity Tools

Chip & Coolant Management

Make and Remove Chips Efficiently

Optimize Your Cutting Conditions

Parts come out best when the cutting tool is lubricated, the cutting zone is clear, and your machine is free of chips. We obsess over creating the optimal cutting conditions to produce perfect parts.

Coolant Options Overview

Haas offers a wide variety of coolant options to clear chips from your jobs, and keep your coolant topped up and in good condition. Check out this overview to discover the many choices available for your machine.

PROGRAMMABLE COOLANT NOZZLE (P-COOL)

Boost your productivity. Reduce cycle times. Eliminate all that opening and closing of the mill doors to adjust coolant lines. Our Programmable Coolant Nozzle is a multi-position nozzle that automatically directs coolant precisely at the cutting tool. The position of the nozzle is controlled via the program, and set specifically for each tool length – saving operator time by eliminating constant adjustments. 

LEARN MORE

Different Chips, Different Solutions

How do Haas vertical machining centers keep your cutting tools lubricated and clear chips from the cutting area? This video shows all the ways Haas VMCs tackle these important tasks.

auger

Not All Chips Are Created Equal

With more than 225,000 machines in the field, and more than 300 Haas machines in our own machine shop, there isn’t a chip-management issue we haven’t seen. And our solutions to those issues become features and options on Haas machine tools. Whether you cut steel, aluminum, high-temp alloys, or even non-metallic materials, there’s a Haas solution to suit your needs.

coolant refill

Chip Clearing

Re-cutting chips results in accelerated tool wear, poor surface finishes, and – at worst – scrap. To effectively remove chips from the cutting area, we offer a host of high-productivity solutions, like Through-Spindle Coolant, Through-Tool Air Blast, Minimum-Quantity Lubrication, and more.

Chip Removal

Your machine is one of the most important employees in your shop. It always should be making chips. Having to stop the machine to remove chips, means it’s not making you money. We offer a variety of chip-removal solutions to keep your machine making chips.
 

Coolant Management

Coolant management isn’t just about keeping up the coolant level, but also about keeping the coolant clean and that the coolant concentration remains optimal. Our solutions are the result of solving problems for our customers, as well as in our own machine shop.
 

Minimum Quantity Lubrication
Can’t use water-based coolant on your parts . . . but still need to keep your cutting tools lubricated? The Haas Minimum Quantity Lubrication System can help you out.
Coolant Refill
The Haas Automatic Coolant Refill System is designed to enhance your productivity, by simplifying the way you make coolant. We take all the calculation, chemistry, and mixing out of the process.
4 Steps to Coolant Maintenance
Follow along as Mark shows us a 4-step method for mixing new coolant to fill the coolant tank on your Haas CNC machine.
Programmable Coolant Nozzle
In today’s episode, Mark demonstrates several ways to set your Haas Programmable Coolant Nozzle (P-Cool), and reveals a couple of programming tips you probably didn’t know about.
Cleaning Your Tank
In this video, we look at cleaning out a marginally dirty tank, and then move on to a really dirty tank, and the steps involved in cleaning the machine’s entire coolant system when it’s been overrun by neglect and contamination.
Tools of Coolant
The first video in our Machine Tool Coolant Video Series takes a look at the tools most often used during the preparation of machine tool coolant and coolant tank maintenance.
Through-Spindle Coolant on Haas Machines
Take a look at how Through-Spindle Coolant makes a difference when machining. High-pressure coolant gets pushed up and through the spindle and out of the tool tip for maximum tool lubrication even in tight areas.
High Pressure Coolant
Put up to 300 psi of coolant right where you need it. Flush chips out from deep holes and increase tool lubrication, resulting in quicker cycler times and better finishes on parts.
Through-Spindle Coolant Challenge
See exactly how through-spindle coolant compares to traditional peck drilling. In this live Tip of The Day, Mark walks you through the benefits of drilling holes with through spindle coolant.

Get More from Your Haas Investment

Browse these available Chip & Coolant Management products for your machine.

Available on the following machines: :

Quad-Auger System w/Conveyor

Conveyor can discharge chips to either side

   

Dual-Auger System w/Conveyor

Discharge chips to the left or right

   

Belt-Type Chip Conveyor UMC

Automatically remove chips from the machine

   

Belt-Type Chip Conveyor HMC

Automatically remove chips from the machine

   

3rd-Party Conveyor Support

Control a 3rd-party conveyor

   

Chip-Disk Filtration Chip Conveyor

Keeps chips out of the coolant tank

   

Multi-Auger Chip Removal System

Maximize chip removal for increased uptime

   

Chip Auger

Automatically remove chips from the machine

   

Haas Chip Lift

Convey chips into a standard barrel or hopper

   

In-Tank Chip Conveyor

Belt-type conveyor discharges chips at standard 55-gallon barrel height

   

Chip Tray Filter Kit

Keep chips out of your coolant

   

Programmable Coolant Nozzle

No more manually adjusting coolant nozzles

   

Automatic Air Gun

Clear chips with high-flow air

   

Through-Tool Air Blast

High-pressure/high-flow air through the tool

   

Minimum Quantity Lubrication

Near-dry machining for difficult materials

   

PulseJet System

Precision lubrication for drilling and tapping

   

Enclosure Exhaust System

Fast, affordable mist extraction

   

Coolant Mist Condenser

Complete recirculation system

   

Automatic Coolant Refill

No more wasting time mixing coolant

   

Coolant Maintenance Package

Keep your coolant clean and properly mixed.

   

Window Air Blast

Quickly clear a section of the window while machining

   

Coolant Pump Kit

The standard coolant system for TM/TL series

   

High-Flow Coolant Pump

More coolant pressure for TM Series

   

Coolant Pump Kit

The standard coolant system for MM Series

   

High-Flow Coolant Pump

Higher coolant pressure for MM Series

   

Chip and Coolant Guard

Standard guarding for GR Series

   

Gantry Router Coolant System

Complete coolant system for GR Series

   

95-Gallon Coolant Tank

The standard coolant system on larger mills and lathes, and optional on many others

   

55-Gallon Coolant Tank

The standard coolant system for many small and medium mill and lathe models

   

13-Gallon Coolant Tank

The standard coolant system for the CM Series

   

Through-Spindle Coolant Ready

Allows easy field installation of a Haas TSC system

   

Through-Spindle Coolant Ready, 3rd Party

Allows easy field installation of a 3rd-party TSC system

   

Through-Spindle Coolant

Coolant through the tool, 300 psi

   

Through-Spindle Coolant

Coolant through the tool, 300 psi

   

Through-Spindle Coolant, 1k

Coolant through the tool, 1000 psi

   

High-Pressure Flood Coolant

High-pressure, high-flow coolant at the spindle

   

Variable Flow Coolant

Control coolant flow via M-code

   

Coolant Chiller

Stabilizes coolant temperature

   

Coolant Tank Oil Skimmer

Keep oil out of your coolant

   

Auxiliary Coolant Filter

Avoid clogged coolant lines

   

Part Hole Blaster

Clear chips from holes with high-flow air

   
No results for the selected model.
Available on the following machines: :

Belt-Type Chip Conveyor HMC

Automatically remove chips from the machine

   

Chip-Disk Filtration Chip Conveyor

Keeps chips out of the coolant tank

   

Chip Auger

Automatically remove chips from the machine

   

In-Tank Chip Conveyor

Belt-type conveyor discharges chips at standard 55-gallon barrel height

   

Chip Tray Filter Kit

Keep chips out of your coolant

   

Through-Tool Air Blast

High-pressure/high-flow air through the tool

   

Enclosure Exhaust System

Fast, affordable mist extraction

   

Automatic Coolant Refill

No more wasting time mixing coolant

   

Window Air Blast

Quickly clear a section of the window while machining

   

95-Gallon Coolant Tank

The standard coolant system on larger mills and lathes, and optional on many others

   

Through-Spindle Coolant Ready

Allows easy field installation of a Haas TSC system

   

Through-Spindle Coolant Ready, 3rd Party

Allows easy field installation of a 3rd-party TSC system

   

Through-Spindle Coolant

Coolant through the tool, 300 psi

   

Through-Spindle Coolant, 1k

Coolant through the tool, 1000 psi

   

High-Pressure Flood Coolant

High-pressure, high-flow coolant at the spindle

   

Variable Flow Coolant

Control coolant flow via M-code

   

Coolant Tank Oil Skimmer

Keep oil out of your coolant

   

Auxiliary Coolant Filter

Avoid clogged coolant lines

   
No results for the selected model.
Available on the following machines: :

Belt-Type Chip Conveyor, Lathe

Automatically removes chips from the machine

   

Chip Tray Filter Kit

Keep chips out of your coolant

   

Enclosure Exhaust System

Fast, affordable mist extraction

   

Coolant Mist Condenser

Complete recirculation system

   

Automatic Coolant Refill

No more wasting time mixing coolant

   

Coolant Maintenance Package

Keep your coolant clean and properly mixed.

   

Window Air Blast

Quickly clear a section of the window while machining

   

Coolant Pump Kit

The standard coolant system for TM/TL series

   

Chuck Air Blast

Clear chips automatically

   

Sub-Spindle Air Blast

Clear chips automatically

   

13-Gallon Coolant Tank

The standard coolant system for the CL Series

   

95-Gallon Coolant Tank

The standard coolant system on larger mills and lathes, and optional on many others

   

55-Gallon Coolant Tank

The standard coolant system for many small and medium mill and lathe models

   

30-Gallon Coolant Tank

The standard coolant system for ST-10/15 Series

   

Variable Flow Coolant

Control coolant flow via M-code

   

High-Pressure Coolant

Coolant through the tool, 300 psi

   

High-Pressure Coolant, 1k

Coolant through the tool, 1000 psi

   

Coolant Chiller

Stabilizes coolant temperature

   

Coolant Tank Oil Skimmer

Keep oil out of your coolant

   

Auxiliary Coolant Filter

Avoid clogged coolant lines

   
No results for the selected model.

What machine will you design today?

Build-&-Price

Your next Haas is waiting.

Get Started

Cookie Notice

We use cookies to improve your user experience. Our Cookie Notice describes which cookies we use, why we use them, and how you can find more information about them. Please confirm you consent to us using analytics cookies. If you do not consent, you may still use our website with a reduced user experience.