Product Image

DOWNLOAD AN INSTANT CUSTOM QUOTE FOR ANY HAAS MACHINE

GET QUOTE

5-AXIS SIMPLIFIED

WHICH 5TH AXIS OPTION IS RIGHT FOR YOU?

VERTICAL + ROTARY = FULL 5-AXIS

VMC + ROTARY

LEARN MORE

INTEGRATED FULL 5-AXIS

FULL 5-AXIS MACHINES

Get Started Now

4 STEPS TO 5-AXIS SUCCESS 

1

Choose a Machine or a Machine + Rotary

• Define the size of your workpiece
• Find a platter size to match
• Select the right spindle speed.
• Decide on the number of tools.

2

Pick Your Tools

• Use the shortest tools possible
• Use shrink fit holders for speeds above 10,000 rpm
• High speeds need balanced tools

3

Hold On Tight

• Grip as much of the blank as possible
• Position the part high enough off the table for clearance when indexing

4

Program Away

• Use a CAM System
• Plan out your operations
• Watch your CAM settings

The Power of 5

5-axis machining is easier and less expensive than you think, and can dramatically increase your profits.

  • Haas UMC-750
    This versatile 5-axis universal machining center can position parts to nearly any angle for 5-sided (3+2) machining, or provide simultaneous 5-axis motion for contouring and complex machining.
    Haas UMC-750

    This versatile 5-axis universal machining center can position parts to nearly any angle for 5-sided (3+2) machining, or provide simultaneous 5-axis motion for contouring and complex machining.

  • Haas VF-2SS + TR160
    Simultaneous 5-axis motion reduces the number of operations, cuts cycle times, and reduces the number of setups to increase accuracy and maintain conformity throughout a part run.
    Haas VF-2SS + TR160

    Simultaneous 5-axis motion reduces the number of operations, cuts cycle times, and reduces the number of setups to increase accuracy and maintain conformity throughout a part run.

  • Haas UMC-750
    Shops needing a cost-effective 5-axis solution for cutting tough, difficult-to-machine materials around the clock should look no further than the Haas UMC-750.
    Haas UMC-750

    Shops needing a cost-effective 5-axis solution for cutting tough, difficult-to-machine materials around the clock should look no further than the Haas UMC-750.

  • Haas CM-1 + TRT70
    Adding the super compact TRT70 tilting rotary table to the CM-1 creates a high-precision, 5-axis package for machining small, intricate parts.
    Haas CM-1 + TRT70

    Adding the super compact TRT70 tilting rotary table to the CM-1 creates a high-precision, 5-axis package for machining small, intricate parts.

SIMPLIFY 5-AXIS MACHINING WITH DWO/TCPC

Our powerful DWO/TCPC (Dynamic Work Offsets / Tool Center Point Control) feature lets you create your CAM program ahead of time, and then place the workholding and part anywhere on the table, with no need to repost your program!

Don’t Fear 5-Axis

DON’T FEAR 5-AXIS EP. 1
In the first video of our “Don’t Fear 5-Axis” series, John Nelson explains why 5-axis machining is much simpler than it has ever been, and why any shop can be a 5-axis shop.
DON’T FEAR 5-AXIS EP. 2
In the second video of our “Don’t Fear 5-Axis” series, John Nelson explains how to choose your machine and rotary combination, and discusses which options you should consider adding to make the most of your machine and rotary.
DON’T FEAR 5-AXIS EP. 3
In the third video of our “Don’t Fear 5-Axis” series, John Nelson talks about setting up your rotary table or trunnion, and explains how the Haas DWO/TCPC feature makes 4th- and 5th-axis work simpler than ever.

CUSTOMER TESTIMONIALS

L&S Machine Company

"Our company has all 5-axis machines so that we can support a variety of different industries that we’re in. The reason we got into 5-axis machining is because it cuts the machining operations down; first operation can pick up five of the six sides of a part, and the final operation can pick up the final side that’s bolted down to the table. Having all the same machines allows us to seamlessly schedule work between our facility and the San Jose facility, and having the same controller allows us to transfer the program to either location."

– Rob DiNardi, President

DesignWerkes

Our company serves the Commercial Transportation industry as well as the Aerospace industry. We design and build the power conversion system and the accessory power system for hybrid public transportation buses. For Aerospace parts, we’re making parts for commercial and military avionics.

With the UMC-750, we’re building five sides of the part which allows us to get to five out of those six sides that we need to build. There’s also 5-axis work that needs to be done. In that part, there are ledges with radiuses in between that you can’t build without the 5-axis capability.

– Steve Kille, President & Owner

Boulevard Machine & Gear

"I knew it was time to invest in technology, so in 2009 we bought our first Haas machine. The UMC-750 that we have now allows us to complete jobs that use to take 4, 5, or even 10 setups on a 3 -axis machine, in just 1 or 2 setups. This allows us to take on more work."

– Susan Kasa, President

“We bought the Haas UMC-750s because of the very attractive quality-to-price ratio. We make a lot of complex automotive parts, and needed five-axis machines that weren’t too expensive. The components tend to be big, so we purchased two Haas UMCs – one is running while the other is loading and unloading. They are arranged in a small cell, with one operator to run both.”

Alluminio Sammarinese
Stefano Ceccato | CEO | Alluminio Sammarinese

Rimeco Products

We specialize in aerospace and defense parts. Our Haas machines allow us to do high-speed machining. When we got our first UMC-500, we realized we could add our quick clamp system, which was invented by my dad and uncle, onto that UMC just by modifying it a little bit so the air comes in a little differently. There is a rotary swivel on it, and now we can take our fixtures that we’ve been using for 20 years and put them right on our UMC-500 and continue to machine just as we have in the past, but now with the capability of the 5-axis, it’s just more efficient.

– John Ribic, President

Kibbetech

We got our VF-4SS and ST-20 in early December 2018. We expanded with our UMC-1000 in March 2021. We utilize our UMC-1000 for many new and existing suspension components. We're able to take parts with 5 to 9 different set ups and get them done in 2 set ups. Our Haas machine completely changed how we build and design our components by being able to control this process in-house. HAAS was the clear choice for us when deciding to bring machining in-house. The time we save on set ups pays for the machine.


– Ryan Kibbe, CEO

Cat-Wood Metalworks

"The versatility is untouchable. It has saved us so much time with our operations. That is why we have 3 of them now. I ran a very familiar job on our first 5-axis, and after seeing how easy it was, that is when we bought two more. With the probing and tool break checks, you don’t have to check on the machine until it’s done. With the 5-axis machines, we’re doing the same amount of work, we’re just getting it done a lot faster."

– A.J Rolling, Owner 

“At the start, we wanted a five-axis machine to differentiate ourselves from three main competitors we had identified in the market. But we needed to find a good machine at a good price, and we couldn’t afford to buy a new one. A pre-owned Haas VF-2 with TR160 trunnion proved to be the ideal solution.”

KMP
Sébastien Korczak | Owner | KMP

Still have questions? Ask away. We’ll get back to you with the answers.

Be as specific as you like, so we can help you find the best 5-axis solution for your shop.

Cookie Notice

We use cookies to improve your user experience. Our Cookie Notice describes which cookies we use, why we use them, and how you can find more information about them. Please confirm you consent to us using analytics cookies. If you do not consent, you may still use our website with a reduced user experience.